If no water comes out of the tap even though the fresh water tank is full, proceed as follows:
- Turn on the tap and check whether you can hear a clicking sound. If this is the case, the tap is usually powered.
- The 12V power supply must also be switched on at the control panel for the pump to run.
- Next, check the water supply fuse under the driver’s seat. The fuses are labelled so that it is easy to find the correct one.
- Please note that in some EBL (electrical block) motorhomes, the fuse is also located under the front passenger seat.
- If the fuse has blown, replace it. After that, the water supply should be working again.
- The cause may also be a faulty tap (microswitch).
Note: If the fuse is intact but no water is being pumped, the water pump may be faulty. In this case, the pump should be checked and, if necessary, replaced.
You can find further articles on the subject of water supply here: Water Supply – Frequently Asked Questions
In our explanatory videos, you can find out how to make the most of the hot water, fresh water and waste water, the control panel and the toilet.
If you have any questions, please do not hesitate to contact your contract partner. You can find a list of all Carado dealers easily and conveniently using our dealer locator.